Wireless configuration
Wireless coverage
3-6
Alternatively, you can stagger cells to reduce overlap and increase channel separation, as
shown in the following figure.
Using only three frequencies across multiple cells in North America.
This strategy can be expanded to cover an even larger area using three channels, as shown in
the following figure.
Using three frequencies to cover a large area in North America. Gray areas indicate
overlap between two cells that use the same frequency.
Distance between APs
Not supported on: E-MSM430, E-MSM460, E-MSM466
In environments where the number of wireless frequencies is limited, it can be beneficial to
adjust the receiver sensitivity of the AP. To make the adjustment, select Wireless > Radio(s)
and set the Distance between access points option.
To Next Page
Loading...
Need help?
General
