Management
System time
2-14
Local manager account
The login username and password are the same as those defined for the local manager
account. If this account is disabled, the last known username and password for this account
are used.
Administrative user authentication settings
The login username and password use the same settings (Local and/or RADIUS) as defined
for the manager account under Administrative user authentication.
Serial port access
On APs with serial (console) ports, you can opt to provide CLI access via the serial port. You
can also use hardware flow control and set the speed for CLI access via the serial port.
System time
Select Management > System time to open the System time page. This page enables you
to configure the time server and time zone information.
1. Set timezone & DST as appropriate.
2. Set Time server protocol, to Simple Network Time Protocol.
3. Select Set date & time (time servers) and then select the desired time server. Add
other servers if desired. The AP contacts the first server in the list. If the server does not
reply, the AP tries the next server and so on.
To Next Page
Loading...
Need help?
General
