Maintenance
Config file management
8-3
All other configuration information: All other configuration information is saved as
plain text, allowing the settings to be viewed with a standard text editor.
Reset configuration
See Resetting to factory defaults on page D-1.
Restore configuration
The Restore configuration option enables you to load a previously saved configuration file.
This option enables you to maintain several configuration files with different settings, which
can be useful if you must frequently alter the configuration of the AP or if you are managing
several APs from a central site.
Use the following steps to restore a saved configuration file.
1. Select Maintenance > Config file management. The Config file management page
opens.
2. Under Restore configuration, select Browse to navigate to and select the
configuration file that you want to restore.
3. If the configuration file is protected with a password you must supply the correct
password to restore the complete configuration. If you supply an invalid password, all
settings are restored except for certificates and private keys.
4. Select Restore to load the selected file.
Note The AP automatically restarts when once the configuration file has been loaded.
Scheduled operations
The Scheduled operations feature enables you to schedule unattended backups or
restorations of the configuration file.
Use the following steps to schedule a backup or restoration of the configuration file.
1. Select Maintenance > Config file management. The Config file management page
opens.
2. Select the Scheduled operations checkbox.
3. For Operation, select Backup or Restore.
4. For Day of week, select Everyday, or select a specific day of the week on which to
perform the backup or restoration.
5. For Time of day, specify the hour and minute on which to perform the backup or
restoration. Use the format hh mm, where
hh ranges from 00 to 23
mm ranges from 00 to 59
To Next Page
Loading...
Need help?
General
