Management
Management tool
2-2
Management tool
The management tool is a web-based interface to the AP that provides easy access to all
configuration and monitoring functions.
The computer used to connect to the management tool must:
Have at least Microsoft Internet Explorer 7/8 or Mozilla Firefox 3.x.
Be able to establish an IP connection with the AP.
Starting the management tool
To launch the management tool, specify the following in the address bar of your browser:
https://AP_IP_address
Factory default APs use address 192.168.1.1.
About
passwords
The default username and password is admin. New passwords must be 6 to 16 printable
ASCII characters in length with at least 4 different characters. Passwords are case sensitive.
Space characters and double quotes ( “ ) cannot be used. Passwords must also conform to the
selected security policy as described in Security policies on page 2-6.
For information on starting the management tool for the first time, see the relevant document
as described in Getting started on page 1-11.
A security certificate warning is displayed the first time that you connect to the management
tool. This is normal. Select whatever option is needed in your Web browser to continue to the
management tool. The default certificate provided with the AP will trigger a warning message
on most browsers because it is self-signed. To remove this warning message, you must
replace the default certificate. See About certificate warnings on page 6-17.
To Next Page
Loading...
Need help?
General
