HP MSM3xx User Manual

Connecting external antennas
Introduction
C-2
Introduction
Caution This appendix provides mandatory radio power-level settings that must be configured to
ensure that your device complies with regulatory requirements in your region. Depending on
the country of use, the antenna selected, and your radio settings, it may be mandatory to
reduce the radio transmission power level to maintain regulatory compliance. For specific
power limits for your country, consult the Antenna Power-Level Setting Guide (for MSM
Products) available from www.hp.com/networking/support.
This appendix applies to you if you use any of the HP antennas discussed in this appendix
with HP MSM access points.
Guides for the antennas discussed in this appendix are available online from:
www.hp.com/networking/support. For Product Brand, select ProCurve.
802.11n MIMO antennas for the E-MSM466
These four 802.11n MIMO antennas are certified only for use with the E-MSM466 Access
Point:
Caution Antennas J9169A and J9170A
In the European Community, these antennas can only be used in the 5470-5725 MHz band. In
the USA, these antennas can be only be used in the 5725-5850 MHz band.
Part Ty p e Band Gain Use Elements
J9171A Omni-directional 2.4/5GHz 3/4dBi Indoor 3
J9659A Omni-directional 2.4/5GHz 1.5/5dBi Indoor 6
J9169A Narrow Beam Sector 2.4/5GHz 8/10.7dBi Outdoor (Indoor) 3
J9170A Directional 2.4/5GHz 10.9/13.5dBi Outdoor (Indoor) 3

HP MSM3xx Specifications

General

Brand	HP
Model	MSM3xx
Category	Wireless Access Point
Language	English