Wireless configuration
Viewing wireless information
3-36
This page lists all wireless clients associated with all VSCs.
MAC Address
MAC address assigned to the client station. Select the MAC address to view more
detailed information on the client.
IP address
IP address assigned to the client station.
VLAN
VLAN assigned to the client station.
SSID
SSID to which the client station is associated.
Authorized
Yes: Client station has the right to transmit/receive traffic.
No: Indicates that the client station can only transmit/receive 802.1X packets.
Filtered: Indicates that traffic is blocked by a MAC filter.
Authentication
Indicates how the station was authenticated 802.1X and/or MAC. If a station successfully
authenticates with both 802.1X and MAC, only the 802.1X indication is shown.
Association time
Indicates how long the client station has been associated with the AP.
Signal
Indicates the strength of the radio signal received from client stations. Signal strength is
expressed in decibel milliwatt (dBm). The higher the number the stronger the signal.
Noise
Indicates how much background noise exists in the signal path between client stations
and the AP. Noise is expressed in decibel milliwatt (dBm). The lower (more negative) the
value, the weaker the noise.
SNR
Indicates the relative strength of the client station radio signals versus the radio interfer-
ence (noise) in the radio signal path.
In most environments, SNR is a good indicator for the quality of the radio link between
the client stations and the AP. A higher SNR value means a better quality radio link.
Action
Select
Disassociate to disconnect a wireless client.
To Next Page
Loading...
Need help?
General
