Huawei FusionServer Pro 2288X V5 User Manual

Procedure (on the BIOS)
Step 1 Restart the server, and enter the BIOS.
For details, see 9.6 Accessing the BIOS.
Step 2 Choose Advanced > IPMI iBMC Conguration and press Enter.
The IPMI iBMC Conguration screen is displayed.
Step 3 Select iBMC Conguration and press Enter.
The iBMC Conguration screen is displayed, showing the iBMC IP address.
Step 4 Select IPv4 IP Address and press Enter.
The IPv4 IP Address dialog box is displayed.
Step 5 Change the IPv4 address of the iBMC management network port.
Step 6 Press F10.
Save the settings and exit.
----End
7.4.6
Conguring RAID
The 2288X V5 supports multiple types of RAID controller cards.
● Use Intelligent Computing Compatibility Checker to obtain information
about the compatible RAID controller cards.
● The
conguration method varies depending on the RAID controller card
model. For details, see Huawei V5 Server RAID Controller Card User Guide.
7.4.7
Conguring the BIOS
Scenarios
This section describes how to congure the BIOS of the server.
To
congure the BIOS, perform the following operations:
● Set the system boot sequence
● Set PXE for a NIC
● Set the BIOS password
● Select a language
For details about other
congurations, see Huawei Server Purley Platform BIOS
Parameter Reference.
FusionServer Pro 2288X V5 Server
User Guide 7 Installation and Conguration
Issue 04 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 105

Huawei FusionServer Pro 2288X V5 Specifications

General

Brand	Huawei
Model	FusionServer Pro 2288X V5
Category	Server
Language	English