Name: Huawei FusionServer Pro 2288X V5
Brand: Huawei
Rating: 5 (1 reviews)

To Next Page

To Previous Page

● The default boot mode is UEFI.

● For some OSs, if the capacity of the drive or RAID array for installing the OS is greater

than 2 TB, use the UEFI boot mode. For details, see the release notes of the OS.

● If the OS is installed on an NVMe drive, the boot mode must be the UEFI boot.

● The UEFI boot mode supports more boot devices than the legacy boot mode. The UEFI

boot mode is recommended if a server is

congured with multiple boot devices. If the

legacy mode is set, some devices may fail to boot. If the legacy mode has to be set,

disable serial port redirection or NIC PXE based on service requirements so that the OS

can start. For details, see sections "Setting PXE for a NIC" and "Setting Serial Port

Redirection" in Huawei Server Purley Platform BIOS Parameter Reference.

Step 4 Select Boot Sequence and press Enter.

The Boot Sequence screen is displayed.

The default boot sequence is Hard Disk Drive > DVD-ROM Drive > PXE > Others.

Step 5 Select the target boot device and press F5 or F6 to change the boot order.

● Press F5 to move a boot option down.

● Press F6 to move a boot option up.

The server boots in the order specied on this screen.

----End

7.4.7.3 Setting PXE for a NIC

If a server is congured with multiple NICs, you can set the PXE function for the

NICs on the BIOS.

If multiple boot devices of the same type are congured for a server, you can set the system

boot sequence on the BIOS. For details about how to set the boot device, see Huawei

Server Purley Platform BIOS Parameter Reference.

Procedure

Step 1 On the BIOS main screen, choose Advanced.

The Advanced screen is displayed.

Step 2 Select PXE Conguration and press Enter.

The PXE Conguration screen is displayed.

● Two LOM ports are displayed on the PXE screen. The default value is Enabled for PXE1

and Disabled for other port.

● The PXE settings for the I/O card are also displayed.

FusionServer Pro 2288X V5 Server

User Guide 7 Installation and Conguration

Huawei FusionServer Pro 2288X V5 User Manual

Other manuals for Huawei FusionServer Pro 2288X V5