Figure 5-108 Installing a front I/O module
----End
5.8.3 Removing a SATA/SAS/SSD Hard Disk
This topic describes how to remove a hard disk.
Scenarios
Remove a hard disk if:
● The hard disk has failed.
● The hard disk needs to be replaced with a new model.
● The hard disk has no free space.
Do not power o the RH8100 V3 when removing a hard disk.
Prerequisites
Conditions
You have backed up the data on the hard disk to be removed and deleted RAID
conguration from the hard disk if services are running on the RH8100 V3.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 228
To Next Page
Loading...
Need help?
General