Step 5 Loosen the screws on the RAID controller card. See step (2) in Figure 5-70.
Step 6 Lift the RAID controller card slowly out of the RH8100 V3. See step (3) in Figure
5-70.
Figure 5-70 Removing a RAID controller card
Step 7 Place the removed RAID controller card in an ESD bag.
----End
5.6.6 Installing a RAID Controller Card
This topic describes how to install a RAID controller card.
Scenarios
Install a RAID controller card if:
● A RAID controller card has failed.
● A RAID controller card needs to be replaced with a new model.
If the RH8100 V3 is
congured with a RAID controller card, the cable connections
between the RAID controller card and the hard disk backplane are shown in
Figure 5-71.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 188
To Next Page
Loading...
Need help?
General