5.9 Replacing a Fan Module and PSU
This topic describes how to replace a fan module and power supply unit (PSU).
5.9.1 Removing a Fan Module
This topic describes how to remove a fan module.
Scenarios
Remove a fan module if it has failed.
Prerequisites
Conditions
None
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for removing a fan
module.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Press and hold down the plastic latch on the inner side of the fan module handle.
See step (1) in Figure 5-129.
Step 3 Pull the fan module out of the chassis in the arrow direction. See step (2) in
Figure 5-129.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 251
To Next Page
Loading...
Need help?
General