Figure 5-145 Removing a USB ash drive
Step 3 Place the removed USB ash drive in an ESD bag.
----End
5.10.8 Installing a USB Flash Drive
This topic describes how to install a USB ash drive.
Scenarios
Install a USB
ash drive if:
● A USB ash drive has failed.
● A USB ash drive needs to be replaced with a new model.
Prerequisites
Conditions
● You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
● You have removed the High-performance Fusion Console (HFC) from the
RH8100 V3. For details, see 5.10.1 Removing an HFC.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for installing a USB
ash
drive.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 273
To Next Page
Loading...
Need help?
General