Figure 5-160 Installing a hot-swappable PCIe card
Step 7 Press the hot swap button on the right of the PCIe card.
15, 16, and 17 in Figure 2-10 show the positions of the status indicator, power
indicator, and hot swap button on the PCIe card respectively.
Within 10 seconds when the power indicator is blinking, press the hot swap button again to
cancel the hot swap operation.
Step 8 Wait for at least 10 seconds until the power indicator is steady on, which indicates
that the power supply to the PCIe card is normal.
----End
5.11.5 Removing a Non-Hot-Swappable PCIe Card
This topic describes how to remove a non-hot-swappable PCIe card.
Scenarios
Remove a non-hot-swappable PCIe card if it has failed.
Prerequisites
Conditions
● You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 294
To Next Page
Loading...
Need help?
General