EasyManuals Logo
Home>Huawei>Server>RH8100 V3

Huawei RH8100 V3 User Manual

Huawei RH8100 V3
386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #249 background imageLoading...
Page #249 background image
Gently insert the NVMe PCIe SSD into the slot. For details, see 5.8.4 Installing
a SATA/SAS/SSD Hard Disk.
The green indicator for the NVMe PCIe SSD is o, and the yellow indicator
blinks at 2 Hz. Then both the green indicator and the yellow indicator are o
for 30 seconds.
When the green indicator for the NVMe PCIe SSD becomes steady on, check
the SSD status on the OS.
Step 5 Install an OS on the NVMe PCIe SSD.
OS installation notes
When installing Windows Server 2012 on an NVMe PCIe SSD, load the
NVMe PCIe SSD driver for the system to detect the SSD before
proceeding with OS installation. When you install another compatible OS
on an NVMe PCIe SSD, the NVMe PCIe SSD driver is installed along with
the OS.
The
Unied Extensible Firmware Interface (UEFI) mode is required when
you install an OS on an NVMe PCIe SSD.
Set the UEFI mode.
Press Del upon server startup to access the BIOS. (The default BIOS
password is Huawei12#$ for the American keyboard, Huqzei&é34 for
the French keyboard, and Huawei12£$ for the English keyboard.)
Open the boot
conguration screen and set Boot Type to UEFI Boot
Type.
Press F10 to save the setting and exit.
Install Windows Server 2012 on the NVMe PCIe SSD.
Set the UEFI mode.
Download the NVMe PCIe SSD driver for Windows Server 2012, and
generate an ISO or IMG
le.
Install the OS. If the NVMe PCIe SSD cannot be detected when the
system scans for the target installation device, mount the NVMe PCIe
SSD driver
le by using the virtual DVD drive or oppy disk drive (FDD)
on the iMana 200 or iBMC WebUI.
Load the NVMe PCIe SSD driver on the installation UI. After the NVMe
PCIe SSD is detected, proceed with the OS installation.
----End
5.8.7 Removing a RAID Controller Card
This topic describes how to remove a RAID controller card.
Scenarios
Remove a RAID controller card if:
The RAID controller card on the front I/O module has failed.
The RAID controller card needs to be replaced with a new model.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 239

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei RH8100 V3 and is the answer not in the manual?

Huawei RH8100 V3 Specifications

General IconGeneral
BrandHuawei
ModelRH8100 V3
CategoryServer
LanguageEnglish

Related product manuals