Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for installing a battery.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
Hardware
Spare battery
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare battery out of its ESD bag.
Step 3 Hold the battery with the side marked with text facing upwards, insert the left end
of the battery into the slot, and gently press down the battery until it is properly
installed in the slot. See Figure 5-148.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 277
To Next Page
Loading...
Need help?
General