Icom IC-F52D User Manual

9
BIIS 1200 SYSTEM OPERATION
9-9
Incoming list
The transceiver saves a log of the received Individual
calls, Group calls, Status Messages, Messages and
Emergency calls in the memory, depending on the
presetting�
Up to 10 Status/Message/Emergency or 5 Voice calls
can be saved in the log, and the oldest call record is
deleted when an 11th (Status/Message) or 6th (Voice)
call is received� However, once the transceiver is
turned OFF, the all records are deleted�
D Displaying the Incoming list
(Menu > Signaling/Call > Incoming)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select
“Incoming,” then push [OK]�
Group Select ►
Incoming ►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select
“Voice” or “Message/Status,” then push [OK]�
Voice ►
Message/Status ►
Signaling/Call
• Voice: The received Individual or
Group call entries are saved in
the log�
• Message/Status: The received Status Message
and Message entries are
saved in the log�
When “Voice” is selected in step 4:
The “Voice” screen is displayed�
Station 1
Station 3
Voice
TIP: Skip step 5 and go to step 6�
When “Message/Status” is selected in step 4:
The “Message/Status” screen is displayed�
Station 2 ►
Station 4 ►
Message/Status
5� Push [P2 (Up)] or [P1 (Down)] to select the log,
then push [OK]�
• The Message content is displayed�
Go to Area 2 after you
finish your task. I have
made about half of
Message Display
6� Hold down [Back] for 1 second to return to the
standby screen�

Icom IC-F52D Specifications

General

Brand	Icom
Model	IC-F52D
Category	Transceiver
Language	English