Icom IC-F52D User Manual

3
BASIC OPERATION
3-9
D Sending a call to a destination
When a tone frequency (2-Tone) or code (5-Tone)
is preset in the Call List, a user can select it as a
destination�
(Menu > Signaling/Call > Call List Select)
1� Push [Menu] to display the Menu screen.
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Call List
Select,” then push [OK]�
Call List Select ►
Call Menu ►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select a
destination, then push [OK]�
✔ Station 1
✔ Group 1
Call List Select
Call List Select
Group 1
• The selected destination is briey displayed and set.
5� Hold down [Back] for 1 second to return to the
standby screen�
Receiving and transmitting (Continued)

Icom IC-F52D Specifications

General

Brand	Icom
Model	IC-F52D
Category	Transceiver
Language	English