Icom IC-F52D User Manual

7
NXDN™ OPERATION
7-19
D Deleting the Outgoing list
The transmit call log can be deleted from the Outgoing
list�
(Menu > Signaling/Call > Clear Outgoing)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Clear
Outgoing,” then push [OK]�
Clear Incoming ►
Clear Outgoing ►
Signaling/Call
4� After a dialog is displayed as shown below, push
[P2 (Up)] or [P1 (Down)] to select <OK> on the
screen and push [OK]�
R Are u Sure?
Cancel
OK
• The selected call log is deleted from the Outgoing list�
5� Hold down [Back] for 1 second to return to the
standby screen�
The transceiver saves a log of the transmitted
Individual calls and Call Alert calls in the memory,
depending on the presetting�
Up to 5 calls can be saved in the log, and the oldest
call record is deleted when a 6th call is received�
However, once the transceiver is turned OFF, the all
records are deleted�
D Displaying the Outgoing list
(Menu > Signaling/Call > Outgoing)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select
“Outgoing,” then push [OK]�
Message ►
Outgoing ►
Signaling/Call
• The calling station name (or ID) is displayed in the
“Outgoing” screen�
Station 1
Station 3
Outgoing
L “ ” is for Individual calls�
L “
” is for Call Alert calls�
4� Hold down [Back] for 1 second to return to the
standby screen�
Outgoing list

Icom IC-F52D Specifications

General

Brand	Icom
Model	IC-F52D
Category	Transceiver
Language	English