8
MDC 1200 SYSTEM OPERATION
8-10
After receiving an MDC Sel Call, Call Alert call,
or Emergency call, the call log may be displayed,
depending on the presetting� Up to 5 calls can be
memorized, and the oldest call is deleted when a 6th
call is received�
D Checking the Incoming call log
(Menu > Signaling/Call > Incoming)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� [P2 (Up)] or [P1 (Down)] to select “Incoming,” then
push [OK]�
Incoming ►
INDIV Select ►
Signaling/Call
• Incoming log is displayed�
ID 1
ID 1
Incoming
L If there is no log, an error beep sounds and the
following screen is displayed�
►
No Log
Incoming Call log function
The “Voice/Call Alert” screen is displayed�
L “ ” is for the Individual calls�
L “ ” is for the Call Alert calls�
To Next Page
Loading...
Need help?
General
