Icom IC-F52D User Manual

8
MDC 1200 SYSTEM OPERATION
8-6
Transmitting a call
D Transmitting an MDC Revive call
An MDC Revive call revives a stunned transceiver to
normal operation�
(Menu > Signaling/Call > Call Menu)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Call
Menu,” then push [OK]�
Call List Select ►
Call Menu ►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select a station
ID, then push [OK]�
✔ ID 1 ►
✔ ID A01 ►
Call Menu
5� Push [P2 (Up)] or [P1 (Down)] to select “Revive,”
then push [PTT] to transmit an MDC Revive call�
✔ Stun
Revive
Station 1
• “Success” is displayed when an acknowledgment is
received from the targeted station�
• “Failed” is displayed if an acknowledgment is not
received from the targeted station�
TIP: Push [Call Menu] to directly display the “Call
Menu” screen in step 4 above�
D Transmitting an MDC Status call
An MDC Status call enables you to send a preset
Status message� There are 16 kinds of Status
messages�
In addition, the transceiver can send an MDC
Status Poll call that make the targeted station to
automatically transmit a Status call, depending on the
presetting�
(Menu > Signaling/Call > Status)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Status,”
then push [OK]�
Outgoing ►
Status ►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select a Status,
then push [PTT] to transmit an MDC Status call�
✔ STATUS 1
✔ STATUS 2
Status
• “Success” is displayed when an acknowledgment is
received from the targeted station�
• “Failed” is displayed if an acknowledgment is not
received from the targeted station�
TIP:
• Push [Status] to directly display the “Status” screen
in step 4 above�
• Hold down [Status] for 1 second to transmit the
preset Status message that is set in the “Status”
screen�

Icom IC-F52D Specifications

General

Brand	Icom
Model	IC-F52D
Category	Transceiver
Language	English