Icom IC-F52D User Manual

6
MENU SCREEN
6-8
C.Tone CH Sel
In the Analog mode
Sets a Continuous tone channel� (p� 3-5)
Compander
Turns the Compander function ON or OFF�
This function reduces noise components on the
transmit audio for clear communication�
Priority A CH
Selects the Priority A channel� (p� 3-4)
Prio A (RW)
Sets a current channel as the Priority A channel�
(p� 3-5)
Priority B CH
Selects the Priority B channel� (p� 3-4)
Prio B (RW)
Sets a current channel as the Priority B channel�
(p� 3-5)
RAN CH Sel
In the Digital mode
Sets a RAN channel� (p� 3-6)
RF Power
Selects the output power for each channel�
• Options: Low 1, Low 2, High
L “Low 1” is the lowest power level, and “High” is the
highest power level�
L Lower output power during short-range
communications may reduce the possibility of
interference to other stations�
Scan Tag
Sets or clears a Scan tag to or from a channel in a
Scan list� (p� 5-5)
Scan List
Sets a Scan list to be scanned� (p� 5-4)
Scan ON/OFF
Starts or cancels a Scan�
A Scan checks for signals on each channel and stops
when a signal is received�
Scram/Encrypt
In the Analog mode
Turns the Voice Scrambler function ON or OFF�
This function enables private communication between
stations using a Scramble code�
L The same Scramble code must be set in all stations to
communicate�
In the Digital mode
Turns the Encryption function ON or OFF�
This function enables private communication between
stations using an Encryption Key and Key ID�
L The same Encryption Key and Key ID must be set in all
stations to communicate�
Talk Around
Turns the Talk Around function ON or OFF�
The Talk Around function equalizes the transmit
frequency to the receive frequency, for direct
(Simplex) communication�
Zone Select
Selects a Zone� (p� 3-3)
Channel/Scan

Icom IC-F52D Specifications

General

Brand	Icom
Model	IC-F52D
Category	Transceiver
Language	English