Icom IC-F52D User Manual

5
SCAN OPERATION
5-3
(Menu > Channel/Scan > Scan ON/OFF)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Channel/
Scan,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Scan ON/
OFF,” then push [OK]�
Scan List ►
Scan ON/OFF ►
Channel/Scan
4� Push [P2 (Up)] or [P1 (Down)] to select “OFF,”
then push [OK]�
✔ OFF
✔ ON
Scan ON/OFF
SCAN ON/OFF
OFF
• The Scan stops�
• “Scan ON/OFF OFF” is briey displayed.
5� Hold down [Back] for 1 second to return to the
standby screen�
• “ ” disappears� (Depending on the transceiver
version�)
Canceling a Scan

Icom IC-F52D Specifications

General

Brand	Icom
Model	IC-F52D
Category	Transceiver
Language	English