Icom IC-F52D User Manual

7
NXDN™ OPERATION
7-7
D Directly entering message
You can directly enter a message, then send it to the
target station or group�
(Menu > Signaling/Call > Write Message)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Write
Message,” then push [OK]�
Status ►
Write Message ►
Signaling/Call
4� Enter a message of up to 100 characters�
Write Message
InformationL
• To enter the character, rotate [Rotary Encoder] and
push [P2 (Up)]�
Usable characters: a ~ z, A ~ Z, 0 ~ 9,
/ + – = \ . ! ? ʼ , * # ”
• To move the cursor, push [P2 (Up)] or [P1 (Down)]�
• To insert a space, push [P2 (Up)] twice�
• To delete, push [Back]�
5� After entering, push [PTT] to send it�
Go to Area 2
Write Message
• “Success” is displayed when an acknowledgment is
received from the targeted station�
• “Failed” is displayed if an acknowledgment is not
received from the targeted station�
Transmitting a call
TIP:
• The entered message can be temporary saved�
After entering a Message in step 5, push [OK] to
display “Save Msg?�” Push [P2 (Up)] or
[P1 (Down)] to select “Yes,” then push [OK] to
save� However, once the transceiver is turned
OFF, the saved message is deleted�
R Save Msg?
No
Yes
• Push [Write Message] to directly display the “Write
Message” screen in step 4 to the left�

Icom IC-F52D Specifications

General

Brand	Icom
Model	IC-F52D
Category	Transceiver
Language	English