Image Access Bookeye 4 User Manual

Page 104 Operation Manual
D The Setup Level
Please note: The screenshots in this chapter are taken from a WideTEK scanner. The
content of nearly all menus are identical with the menus of the Bookeye
®
4
scanner.
If a menu has a special content at the Bookeye
®
4 scanner, a hint will be
given.
The setup level is divided in three access levels. The access levels Poweruser and
Admin are protected through a password.
The User access level allows showing certain information about the system like power up
time, remaining lamp life time or firmware version.
Furthermore the access level User allows setting some basic parameters.
Start your browser and enter the IP address of the scanner to get access to the scanner.
The Scan2Net® main menu (see chapter C) will open.
The Login Screen
On the start screen, click the button Setup Device .
The next screen shows the login levels User , Poweruser and Admin .
Picture 96: Login screen
Please note: The login levels Poweruser and Admin are password protected. Only
trained technicians should use these levels.

Image Access Bookeye 4 Specifications

General

Brand	Image Access
Model	Bookeye 4
Category	Scanner
Language	English