Page 36 Operation Manual
A.12 Operating the motorized book cradle
A.12.1 The Cradle Lock Button
Off: If the button light is off, the magnetic lock function is turned off
Blue: If the button light is blue, the magnetic lock function of the glass plate is activated.
Red: If the button light is red, the magnetic lock is engaged and the glass plate is held in
the closed position.
If the “Automatic mode” (see chapter A.13.1) is selected, the scan sequence starts
automatically.
A.12.2 The Cradle Up / Cradle Down Buttons
To move the book cradle to the desired position, press and hold the
• Cradle Up button to lift the book cradle plates,
• Cradle Down button to lower the book cradle plates.
Depending on the weight of the document placed on the book cradle, e.g. book or
catalogue, lifting of the book cradle plates starts at the side with the lighter load.
While moving the book cradle plates, the illumination in the respective buttons changes
from blue to red.
When the button is released the illumination returns to blue.
When both book cradle plates have been lifted completely, the motor stops.
Note: If there is no weight on the cradles, the operator has to press down the cradle
plates manually while holding the “Cradle Down” to get them down completely.
To Next Page
Loading...
Need help?
General
