Image Access Bookeye 4 User Manual

Operation Manual Page 21
A.4 Device Location
A.4.1 Environment
Choose a location that complies with the temperature and humidity specifications. For
detailed information on these specifications, see the chapter E.4.
Please allow
• a minimum distance of 500 mm (20 inch) from any side walls,
• a minimum distance of 500 mm (20 inch) from a back wall,
• a minimum distance of one meter (3 feet) from any door or entrance way.
Picture 1: Minimum distance between Bookeye and walls
Do not operate the scanner in an area that has poor air circulation, and/or that is non-
ventilated.
Place the Bookeye
®
4 scanner on a flat and solid base. The load bearing capacity of the
base must correspond to the device weight.
The dimensions of the base must match with the floor space required by the scanner.
Please note: Before using the Bookeye
®
4 scanner in the new environment allow at least
one hour for temperature adaptation.
What does “temperature adaptation” means?
A fast change from cold to warm environmental conditions can build up
condensation inside the housing. This will result in unfavorable scanned
images and could cause permanent damages to the unit.

Image Access Bookeye 4 Specifications

General

Brand	Image Access
Model	Bookeye 4
Category	Scanner
Language	English