Image Access WideTEK 36 User Manual

Manual Page 103
B.3.10.1 USB Storage Device
Go to Options to configure the USB interface. A configuration window will pop up.
Parameter Description
Partition
Shows the status and available memory of the actual
mounted partition on the connected USB flash device.
Directory
Allows choosing a subdirectory on the connected USB
drive for storing the scans.
File name
Shows the actually setting of wildcard characters for the
automated naming of each produced image file.
Wild card characters
Offer the complete list of the available wild cards.
Configuration Test
Initiates a short test connection to the connected USB
device.
Configuration Test: Click on this link to test the settings. A separate window will open
and shows the test results.
Note: Each change to an entry field is transferred to the scanner immediately.
B.3.10.2 List of suitable USB storage media
The criteria in the following list have been defined as a guide line for the storage media
which can be connected to the USB connectors.
• USB memory sticks,
• USB hard disks,
• USB hard disks without partition, with one or with multiple partitions,
formatted with the file systems UDF, FAT, FAT16, VFAT, FAT32, NTFS, EXT2, EXT3
or ReiserFS
The file systems EXT4, BTRFS, UFS, ZFS or exFAT will currently not be supported.

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English