Manual Page 57
A.23 Transport Control Screen
Picture 53: Transport control
A.23.1 Start button
Defines the start method of the scanner.
• Direct: The scan starts when the scanner receives the start command from the
application.
• Wait: The scan will only start if the start button in the touch panel is pressed.
The start button can also be a foot pedal.
• Always The document transport starts immediately after the start command is
sent from the application.
A.23.2 Transport
Defines the transport speed of the scanner.
• Normal Standard transport speed depending on the selected scan resolution,
i.e. the higher the scan resolution, the slower the transport speed.
• Slow The scanning speed is reduced and the paper handling is relaxed, in
order to make the handling of sensitive documents safer. This can also
be helpful for untrained operators.
A.23.3 Scan mode
Defines the scanning mode.
• H. Quality: Reduces the scanning speed to achieve the best quality.
• Fast Reduces the exposure time but the resolution as well as all as other
parameters remain the same.
To Next Page
Loading...
Need help?
General
