Image Access WideTEK 36 User Manual

Manual Page 63
A.25 Software Option: Scan2VGA
An external monitor can be connected to the WideTEK 36 to show, edit and save the
actual scanned image on the fly.
When the scan sequence has been finished, the menu in the touch panel will change.
By tapping at the respective buttons the menus can be selected.
Picture 63: Touchpanel after scanning
Scan settings which made before can be
changed here again and the results are shown
directly at the external monitor.
The edited image can be saved by touching the
Save button. Available targets are:
• Network
• USB
• Printer
• FTP
• Email
With touching the Exit button the mode will be left.

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English