Image Access WideTEK 36 User Manual

Manual Page 89
Remote Printer, continued
Parameter Description
Duplex Print
(not with HP Design Jet)
Switch on/off printing on both sides of a sheet (duplex).
Duplex Mode
Select between Book and Notepad.
Book = binding at the wide side of the paper sheet
Notepad = binding at the narrow side of the paper sheet
Paper Feed
Select the paper feed method for the remote printer. The
menu content depends on the selected printer.
Roll Width
(HP DesignJet Series)
Offers a list of paper widths.
Copies
Number of copies of each print
B.3.5.2 Printing Enhancement
Parameter Description
Quality Level
(with HP DesignJet Series only)
Toggle the printing quality from draft to high quality.
ICC Profile
(not with all printer types)
Select the profile used for printing.
The Poweruser level allows uploading printer ICC profiles
to the scanner. Available profiles will be displayed in the
list.
Color Matching
(not with all printer types)
Select the color rendering method for the remote printer.
Perceptual
The printer uses the nearest matching colors of
its own color space.
Saturation
: The printer uses the full range of its color
space despite of the color definition of the scanned
document.
ICC Profile: Uses the ICC profile of the printer.
Resolution Enhancement
(not with Postscript )
Select the resolution enhancement from the list.
Edge Antialiasing
(not with all printer types)
Switch on/off printer featured edge anti aliasing.
Brightness
(not with HP LaserJet Series)
Modify the brightness level of the print.
Contrast
(not with HP LaserJet Series)
Modify the contrast level of the print.
Gamma
(not with HP LaserJet Series)
Modify the gamma level of the print.
Note: Each change to an entry field is transferred to the scanner immediately.

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English