19
XP7202 Instruction Manual
Travel Adjust
With the power off, turn the transmitter on then press the
clear key to enter the main menu.
Press the Down and Select keys simultaneously to
enter the function mode.
Press the UP or Down key until TRAVEL ADJUST
appears on screen. Press the Select key to move the
cursor arrow to the desired channel.
Use the Select key to choose the appropriate channel
that you wish to adjust.
Press the IncreaSe or DecreaSe key to increase or
decrease the servo throws in each direction. While holding
the channel or switch in the desired direction press the
IncreaSe
or DecreaSe key to adjust the travel adjust
in that direction.
This completes the basic Quick Start setup for your
airplane. For additional features like Dual and Expo
rates, Mixing, etc, see the appropriate pages listed in
the table of contents.
NOTE
: If your airplane’s ailerons are controlled
independently by two servos, see “Wing Type
Press the Select key to select the desired channel then press the IncreaSe or DecreaSe key to select reverse or
normal servo direction.
To Next Page
Loading...
Need help?
General
