JR XP7202 User Manual

32
XP7202 Instruction Manual
The XP7202 features a memory function that stores the
programmed data for up to 20 models. Any combination
of up to 20 airplanes and/or helicopters can be stored in
memory. A model name feature with up to eight characters
allows each model to be easily identified.
Press the Down and Select keys simultaneously and
turn the power switch ON to access the System Setup
Mode. Press the IncreaSe or DecreaSe key until the
MODEL SELECT screen appears
Model Select/Copy Function
[MODEL SELECT]
◊SELECT
MODEL 1 JR-PROPO
ACRO PPM
Press to enter main screen
UP and DOWN key
INCREASE and DECREASE key
[MODEL SELECT]
MODEL 1
ACRO SPCM
MODEL 2
ACRO SPCM
◊COPY
≥
Press to enter main screen
Press to select MODEL SELECT
INCREASE and DECREASE key
Press to copy selected model
To Enter the Model Select Function
To Enter the Copy Function
Press the Down and Select keys simultaneously and
turn the power switch ON to access the System Setup
Mode
Press the UP or Down key until MODEL SELECT
appears on screen
Press the Select button to enter the COPY screen
Press the IncreaSe or DecreaSe keys to select to
model that you wish to copy the model to
Press the clear key to copy the model to the selected
model memory
NOTE
: Be aware that the model that you copy to
will have its memory replaced with the new model
and the programming information for that model
will be erased.
Press the IncreaSe or DecreaSe key to select the
desired model memory.
Press to enter COPY screen

JR XP7202 Specifications

General

Brand	JR
Model	XP7202
Category	Remote Control
Language	English