Juniper E Series User Manual

I/O Module Specifications ! 129
Chapter 12: Module Specifications
cOC3
STM1
F0 I/O
LONG
HAUL
ASIC ERX-7xx models
ERX-14xx models
ERX-310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G+
SRP-SE10G
4 SC full duplex
! Tx power:
! min: –5.0 dBm
! max: 0 dBm
! Center wavelength: 1310 nm
! Rx input power:
! min: –34 dBm
! max: –7 dBm
! Fiber type: 9-micron core
! Rated for 40 km (24.8 miles)
of 9-micron core cable
cOC12/STM4
cOC12
STM4
F0 I/O
MULTI
MODE
ASIC ERX-7xx models
ERX-14xx models
ERX-310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G+
SRP-SE10G
1 SC full duplex
! Tx power:
! min: –19 dBm
! max: –14 dBm
! Center wavelength: 1310 nm
! Rx input power:
! min: –30 dBm
! max: –14 dBm
! Rated for 2 km (1.2 miles)
over 62.5-micron core cable
with an optical loss of 0–9 dB
or 50-micron core cable with
an optical loss of 7 dB
cOC12
F0
APS
MULTI
MODE
ASIC ERX-7xx models
ERX-14xx models
ERX-310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G+
SRP-SE10G
1 active
1 redundant
SC full duplex
! Tx power:
! min: –19 dBm
! max: –14 dBm
! Center wavelength: 1310 nm
! Rx input power:
! min: –30 dBm
! max: –14 dBm
! Rated for 2 km (1.2 miles)
over 62.5-micron core cable
with an optical loss of 0–9 dB
or 50-micron core cable with
an optical loss of 7 dB
Table 22: I/O module specifications (continued)
I/O Module
Label
a
Type
Model
Compatibility
SRP Module
Compatibility No. of Ports
Connector
Type Cabling Specifications

Juniper E Series Specifications

General

Brand	Juniper
Model	E Series
Category	Network Router
Language	English