Juniper E Series User Manual

E-series Hardware Guide
130 ! I/O Module Specifications
cOC12
STM4
F0 I/O
SINGLE
MODE
ASIC ERX-7xx models
ERX-14xx models
ERX-310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G+
SRP-SE10G
1 SC full duplex
! Tx power:
! min: –15 dBm
! max: –8 dBm
! Center wavelength: 1310 nm
! Rx input power:
! min: –31 dBm
! max: –8 dBm
! Rated for 15 km (9.3 miles) of
9-micron core cable
cOC12
STM4
LONG
HAUL
ASIC ERX-7xx models
ERX-14xx models
ERX-310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G+
SRP-SE10G
1 SC full duplex
! Tx power:
! min: –5.0 dBm
! max: 0 dBm
! Center wavelength: 1310 nm
! Rx input power:
! min: –34 dBm
! max: –7 dBm
! Fiber type: 9-micron core
! Rated for 40 km (24.8 miles)
of 9-micron core cable
CT1
CT1
FULL
I/O
Non-ASIC ERX-7xx models
ERX-1410 router
SRP-5G
SRP-5G+
SRP-10G
24 RJ-48C
100 ohm
! Use shielded cables to
maintain EMC compliance.
! The line interface unit
supports multiple line
build-outs.
! Signal strength is software
controlled.
! The transmitted signal
complies with ANSI
T1.102-1993 Digital Hierarchy
- Electrical Interfaces (1999)
for cable lengths up to 201 m
(660 feet).
Table 22: I/O module specifications (continued)
I/O Module
Label
a
Type
Model
Compatibility
SRP Module
Compatibility No. of Ports
Connector
Type Cabling Specifications

Juniper E Series Specifications

General

Brand	Juniper
Model	E Series
Category	Network Router
Language	English