Keithley 2611B Reference Manual

Series 2600B
System SourceMeter® Instrument Reference Manual Section 7:
TSP command reference
2600BS-901-01 Rev. B / May 2013 7-149
Details
This function retrieves the value of a global variable from the run-time environment of this node.
Do not use this command to retrieve the value of a global variable from the local node. Instead, access the global
variable directly. This command should only be used from a remote master when controlling this instrument over
a TSP-Link
®
network.
Example
print(node[5].getglobal("test_val"))
Retrieves and outputs the value of the global variable
named test_val from node 5.
Also see
node[N].setglobal() (on page 7-149)
TSP advanced features (on page 6-53)
node[N].setglobal()
This function sets the value of a global variable. This function is not available on the Models 2604B/2614B/2634B.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
node[N].setglobal(name, value)
N
The node number of this instrument (1 to 64)
name
The global variable name to set
value
The value to assign to the variable
Details
From a remote node, use this function to assign the given value to a global variable.
Do not use this command to create or set the value of a global variable from the local node (set the global
variable directly instead). This command should only be used from a remote master when controlling this
instrument over a TSP-Link
®
.
Example
node[3].setglobal("x", 5)
Sets the global variable x on node 3 to the value of 5.
Also see
node[N].getglobal() (on page 7-148)
TSP advanced features (on page 6-53)

Keithley 2611B Specifications

General

Brand	Keithley
Model	2611B
Category	Measuring Instruments
Language	English