To Next Page

To Previous Page

Appendix

C: LAN concepts and settings Series 2600B System SourceMeter® Instrument

Reference Manual

C-2 2600BS-901-01 Rev. B / May 2013

Contact your corporate information technology (IT) department for permission before you connect

the Series 2600B to a corporate network.

If you have problems, see LAN troubleshooting suggestions (on page 8-7).

Record all network configurations before modifying any existing network configuration information on

the network interface card. Once the network configuration settings are updated, the previous

information is lost. This may cause a problem reconnecting the host computer to a corporate

network, particularly if DHCP Enabled = NO (disabled).

Be sure to return all settings to their original configuration before reconnecting the host computer to a

corporate network. Failure to do this could result in loss of data. Contact your system administrator

for more information.

Step 1: Identify and record the existing IP configuration

To identify the existing IP configuration:

1. Open a command prompt window:

Microsoft

Windows

2000 or Windows XP:

a. Click Start and select Run.

b. In the Open field, type cmd.

c. Click OK.

Microsoft Windows Vista

or Windows 7:

a. Click Start.

b. Select All Programs > Accessories > Command Prompt.

2. At the command prompt, type ipconfig/all and press the Enter key. A list of existing IP

configuration information for your computer is displayed.

Keithley 2611B Reference Manual

Other manuals for Keithley 2611B