Keithley 3720-ST User Manual

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-16 3700AS-901-01 Rev. D/June 2018
Details
This function returns result, which is the result of toggling the bit index in value.
Any fractional part of value is truncated to make it an integer. The returned value is also an integer.
The least significant bit of value is at index position 1; the most significant bit is at index
position 32.
The indexed bit for value is toggled from 0 to 1, or 1 to 0.
Example
testResult = bit.toggle(10, 3)
print(testResult)
The binary equivalent of decimal 10 is 1010. Toggling
the bit at index position 3 returns a decimal value of 14
(binary 1110).
Output:
1.40000e+01
Also see
Bit manipulation and logic operations (on page 9-21)
bit.clear() (on page 11-11)
bit.get() (on page 11-11)
bit.set() (on page 11-13)
bit.test() (on page 11-15)
bufferVar.appendmode
This attribute sets the state of the reading buffer's append mode.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
Create configuration script
Saved setup
See Details
Usage
state = bufferVar.appendmode
bufferVar.appendmode = state
state
The reading buffer append mode; set to one of the following:
▪ 0: Append mode off; new measurement data overwrites the previous buffer
content
▪ 1: Append mode on; appends new measurement data to the present buffer
content
bufferVar
The reading buffer

Keithley 3720-ST Specifications

General

Brand	Keithley
Model	3720-ST
Category	Multimeter
Language	English