Keithley 3720-ST User Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-367
Example
print(slot[3].poles.one)
Query to see if slot 3 supports one-pole
settings for the channels on the card.
Output if card supports one pole:
1.000000000e+00
Output if card does not support one pole:
nil
Also see
slot[slot].poles.four (on page 11-366)
slot[slot].poles.two (on page 11-367)
slot[slot].poles.two
This attribute indicates if a two-pole setting is supported for the channels on the card.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
twoPole = slot[slot].poles.two
twoPole
The return value
slot
Slot number (1 to 6)
Details
This attribute only exists is a card is installed and if the card supports a two-pole setting for the
channels on the card.
If not, the value is nil. If supported, the value is 1.
Example
twoPole3 = slot[3].poles.two
print(twoPole3)
Query to see if slot 3 supports two-pole
settings for the channels on the card.
Output if card supports two pole:
1.000000000e+00
Output if card does not support two pole:
nil
Also see
slot[slot].poles.one (on page 11-366)
slot[slot].poles.four (on page 11-366)
slot[slot].pseudocard
This attribute specifies a pseudocard to implement.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Power cycle
Configuration script
slot.PSEUDO_NONE

Keithley 3720-ST Specifications

General

Brand	Keithley
Model	3720-ST
Category	Multimeter
Language	English