Keithley 3720-ST User Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-129
Also see
display.gettext() (on page 11-130)
display.screen (on page 11-138)
display.setcursor() (on page 11-140)
display.settext() (on page 11-141)
display.getlastkey()
This function retrieves the key code for the last pressed key.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
keyCode = display.getlastkey()
keyCode
A returned value that represents the last front-panel key pressed; see Details for
more information
Details
A history of the key code for the last pressed front-panel key is maintained by the instrument. When
the instrument is turned on, or when it is transitioning from local to remote operation, the key code is
set to 0 (display.KEY_NONE).
Pressing the EXIT (LOCAL) key normally aborts a script. To use this function with the EXIT (LOCAL)
key, you must set display.locallockout to display.LOCK.
The table below lists the keyCode value for each front-panel action.
Key codes
Value
Key list
Value
Key list
0
display.KEY_NONE
82
display.KEY_ENTER
65
display.KEY_RANGEUP
83
display.KEY_REC
66
display.KEY_FUNC
84
display.KEY_DMM
67
display.KEY_REL
85
display.KEY_DELETE
68
display.KEY_MENU
86
display.KEY_STEP
69
display.KEY_CLOSE
87
display.KEY_CHAN
70
display.KEY_SLOT
90
display.KEY_RATE
71
display.KEY_RUN
91
display.KEY_LIMIT
72
display.KEY_DISPLAY
92
display.KEY_TRIG
73
display.KEY_AUTO
93
display.KEY_OPEN
74
display.KEY_FILTER
94
display.KEY_PATT
75
display.KEY_EXIT
95
display.KEY_LOAD
76
display.KEY_STORE
97
display.WHEEL_ENTER
77
display.KEY_SCAN
103
display.KEY_RIGHT
78
display.KEY_INSERT
104
display.KEY_LEFT
79
display.KEY_OPENALL
107
display.WHEEL_LEFT
80
display.KEY_CONFIG
114
display.WHEEL_RIGHT
81
display.KEY_RANGEDOWN

Keithley 3720-ST Specifications

General

Brand	Keithley
Model	3720-ST
Category	Multimeter
Language	English