97
4
4
Features of your vehicle Rear View Monitor (RVM)
Rear View Monitor (RVM) (if
equipped)
Rear View Monitor will activate
when the engine is running and the
shift lever is in the R (Reverse) posi
-
tion.
This is a supplemental function that
shows behind the vehicle through
the mirror or navigation display
whilst backing-up.
Rear View Monitor is not a safety
device. It only serves to assist the
driver in identifying objects directly
behind the middle of the vehicle.
The camera does NOT cover the
complete area behind the vehicle.
䳜 Never rely solely on the rear cam
-
era display when backing up.
䳜 ALWAYS look around your vehicle
to make sure there are no objects
or obstacles before moving the
vehicle in any direction to prevent
a collision.
䳜 Always pay close attention when
the vehicle is driven close to
objects, particularly pedestrians,
and especially children.
䳜 Do not spray the camera or its
surrounding area directly with a
high pressure washer. Shock
applied from high pressure water
may cause the device to not
operate normally.
䳜 Do not use any cleanser contain
-
ing acid or alkaline detergents
when cleaning the lens. Use only a
mild soap or neutral detergent,
and rinse thoroughly with water.
䳜 If the camera lens is covered with
foreign material, Rear View Moni
-
tor may not operate normally.
Always keep the camera lens
clean. However, do not use chemi
-
cal solvents such as strong deter
-
gents containing high alkaline or
volatile organic solvents (petrol,
acetone etc.). This may damage
the camera lens.
To Next Page
Loading...
Need help?
General
