115
4
4
Features of your vehicle Lighting
High Beam Assist (HBA) (if
equipped)
High Beam Assist is a function that
automatically adjusts the headlamp
range (switches between high beam
and low beam) according to the
brightness of other vehicles and
road conditions.
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the lever away from you.
High Beam Assist ( ) indicator
will illuminate.
3. High Beam Assist will turn on
when vehicle speed is above
45kph (28mph).
䳜 If the lever is pushed away
when High Beam Assist is oper
-
ating, High Beam Assist will
turn off and the high beam will
be on continuously. High Beam
Assist ( ) indicator will turn
off.
䳜 If the lever is pulled towards
you when the high beam is on
with operating High Beam
Assist, High Beam Assist will
turn off.
4. If the light switch is placed to the
headlamp position, High Beam
Assist will turn off and the low
beam will be on continuously.
The high beam switches to low
beam in the below conditions.
䳜 When High Beam Assist is off.
䳜 When the light switch is not in the
AUTO position.
䳜 When the headlamp is detected
from the on-coming vehicle.
䳜 When the tail lamp is detected
from the front vehicle.
䳜 When the surrounding is bright
enough high beams are not
needed.
䳜 When streetlights or other lights
are detected.
䳜 When vehicle speed is below
35km/h (22 mph).
䳜 When headlamp / taillamp of
bicycle/motorcycle is detected.
The function may not operate nor
-
mally in the below conditions.
䳜 When the light from the oncoming
or front vehicle is not detected
because of lamp damage, hidden
from sight, etc.
To Next Page
Loading...
Need help?
General
