Features of your vehicle
1184
Lighting
To signal a lane change, move the
turn signal lever slightly and hold it
in position (B). The lever will return
to the O (OFF) position when
released.
If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace
-
ment.
One-touch lane change function
To activate an one-touch lane
change function, move the turn sig
-
nal lever slightly and then release it.
The lane change signals will blink 3
times.
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical conne
tion in the circuit.
Front fog light (if equipped)
Type A,B
Type C
Type D
To Next Page
Loading...
Need help?
General
