Driving your vehicle
206
Idle Stop and Go (ISG) system
Auto start
To restart the engine from idle stop
mode (Excluding : Mild Hybrid Elec
-
tric Vehicle)
Manual Transmission/Intelligent
Manual Transmission
Vehicle which is equipped manual
transmission is available two version
of restart.
䳜 Conventional restart
- Press the clutch pedal when the
shift lever is in the N (Neutral)
position.
䳜 Late restart (if equipped)
- Depress the clutch pedal
- Engage the gear
- Release the brake pedal
䳜 Late restart function is only oper
-
ated when it is on a level ground
and the vehicle is stable.
䳜 To start the engine when the
brake is not pressed or the gear is
already engaged, for safety press
the brake pedal first and then
press the clutch pedal.
䳜 To turn on the engine without
vehicle movement with the brake
pedal pressed, (only with Late
Restart)
1. Press and release the clutch
pedal
2. Press the clutch pedal again
immediately
䳜 After the vehicle stalled, the
engine starts if you operate as
shown below
1. Release the clutch pedal, after
the engine completely stop
2. Depress the clutch pedal
Automatic Transmission/Dual
Clutch Transmission
䳜 Release the brake pedal
The engine will start and the green
AUTO STOP indicator ( ) on the
instrument cluster will go out.
To restart the engine from idle stop
mode (Mild Hybrid Electric Vehicle)
Manual Transmission/Intelligent
Manual Transmission
䳜 Before standstill
- Press the clutch pedal if the
clutch pedal has not pressed.
- If the clutch pedal has already
pressed, release the brake
pedal or move the gear to a
position other than N position.
䳜 After standstill
- If the clutch pedal has already
pressed, release the brake
pedal or move the gear to a
position other than N position. If
the clutch pedal has not been
pressed yet, the engine
restarts according to the LATE
Restart procedure.
1) Depress the clutch pedal
2) Engage the gear
To Next Page
Loading...
Need help?
General
