What to do in an emergency
327
If you have a flat tyre (with Tyre Mobility Kit)
Notes on the safe use of the tyre
Mobility Kit
䳜 Park your car at the side of the
road so that you can work with
the TMK away from moving traf
-
fic. Place your warning triangle in
a prominent place to make pass
-
ing vehicles aware of your loca
-
tion.
䳜 To be sure your vehicle will not
move, even when you're on fairly
level ground, always set your
parking brake.
䳜 Only use the TMK for sealing/
inflation passenger car tyres. Do
not use on motorcycles, bicycles
or any other type of tyres.
䳜 Do not remove any foreign
objectssuch as nails or screws -
that have penetrated the tyre.
䳜 Before using the TMK, read the
precautionary advice printed on
the sealant bottle!
䳜 Provided the car is outdoors,
leave the engine running. Other
-
wise operating the compressor
may eventually drain the car bat
-
tery.
䳜 Never leave the TMK unattended
whilst it is being used.
䳜 Do not leave the compressor run
-
ning for more than 10 min. at a
time or it may overheat.
䳜 Do not use the TMK if the ambi
-
ent temperature is below -30󳚛C (-
22󳚛F).
䳜 When the tyre and wheel are
damaged, do not use Tyre Mobil
-
ity Kit for your safety.
Technical Data
System voltage: DC 12 V
Working voltage: DC 10 - 15 V
Amperage rating: 10 A 󳚜 1A (at DC
12V operation)
Suitable for use at temperatures: -
30 ~ +70󳚛C (-22 ~ +158󳚛F)
Max. working pressure: 6 bar (87
psi)
Size
Compressor: 161 x 150 x 55.8 mm
(6.3 x 5.9 x 2.2 in.)
Sealant bottle: 81 x 85 󳛣 mm (3.2 x
3.3 󳛣 in.)
Compressor weight: 650 g (1.43 lbs)
Sealant volume: 200 ml (12.2 cu. in.)
* Sealant and spare parts can be
obtained and replaced at an
authorised vehicle or tyre dealer.
Empty sealant bottles may be dis
-
posed of at home. Liquid residue
from the sealant should be dis
-
posed of by your vehicle or tyre
dealer or in accordance with local
waste disposal regulations.
To Next Page
Loading...
Need help?
General
