11
6
6
Driving your vehicle Key positions
Automatic Transmission/Dual
Clutch Transmission- Place the
transmission shift lever in P
(Park). Depress the brake pedal
fully.
You can also start the engine
when the shift lever is in the N
(Neutral) position.
3. Turn the ignition switch to START
and hold it there until the engine
starts (a maximum of 10 sec
-
onds), then release the key.
It should be started without
depressing the accelerator.
4. Do not wait for the engine to
warm up whilst the vehicle
remains stationary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
If the engine stalls whilst you are in
motion, do not attempt to move the
shift lever to the P (Park) position. If
traffic and road conditions permit,
you may put the shift lever in the N
(Neutral) position whilst the vehicle
is still moving and turn the ignition
switch to the START position in an
attempt to restart the engine.
䳜 Do not engage the starter for
more than 10 seconds. If the
engine stalls or fails to start, wait
5 to 10 seconds before reengag
-
ing the starter. Improper use of
the starter may damage it.
䳜 Do not turn the ignition switch to
the START position with the
engine running. It may damage
the starter.
Stopping the engine (Manual
Transmission/Intelligent Manual
Transmission (iMT))
1. Make sure the vehicle is com
-
pletely stopped and keep the
clutch pedal and brake pedal
depressed.
2. Shift the transmission into Neu
-
tral whilst depressing the clutch
pedal and brake pedal.
3. Engage the parking brake whilst
depressing the brake pedal.
4. Turn the ignition key to the LOCK
position and remove it.
To Next Page
Loading...
Need help?
General
