Driving your vehicle
306
Intelligent Manual Transmission (iMT)
When SSC is off, the engine starts
and the clutch automatically
changes from ä³–openä³— to ä³–closedä³—.
䳜 Start Stop Coasting (SSC) is deac
-
tivated when one of the following
conditions is true:
- Vehicle speed: 15 Km/h (This
speed range varies according to
gear)
- When you press the accelerator
pedal
- When you press the brake pedal
or the clutch pedal
- When door or bonnet is opened,
or seat belt is released
- When 12V battery is not
charged enough
- When 48V battery is not
charged enough
䳜 Start Stop Coasting (SSC) is acti
-
vated when Drive Mode is ECO.
䳜 SSC may be deactivated depend
-
ing on indoor and outdoor tem
-
perature conditions.
䳜 SSC may be deactivated depend
-
ing on climate control conditions.
(defrost, fan speed, etc.)
䳜 Do not shift without pressing the
clutch pedal whilst activating SSC,
it leads to damage of transmis
-
sion.
Shift the gear all the way after
the clutch pedal is fully pressed.
Intelligent Manual Transmission
(iMT) operation
The shift lever can be moved
without pulling the button (1).
The button (1) should be
pressed when moving the shift lever
into reverse.
The Intelligent manual transmission
(iMT) has 6 forward gears.
This shift pattern is imprinted on
the shift knob. The transmission is
fully synchronized in all forward
gears so shifting to either a higher
or a lower gear is easily accom
-
plished.
Depress the clutch pedal down fully
whilst shifting, then release it
slowly.
If your vehicle is equipped with an
ignition lock switch, the engine will
not start when starting the engine
without depressing the brake pedal
and clutch pedal. (if equipped)
To Next Page
Loading...
Need help?
General
