3
7
7
What to do in an emergency Road warning
What to do in an emergency
Road warning
Hazard warning flasher
The hazard warning flasher serves
as a warning to other drivers to
exercise extreme caution when
approaching, overtaking, or passing
your vehicle.
It should be used whenever emer
-
gency repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
Depress the flasher switch with the
ignition switch in any position. The
flasher switch is located in the cen
-
tre console switch panel. All turn
signal lights will flash simultane
-
ously.
䳜 The hazard warning flasher oper
-
ates whether your vehicle is run
-
ning or not.
䳜 The turn signals do not work
when the hazard flasher is on.
䳜 Care must be taken when using
the hazard warning flasher whilst
the vehicle is being towed.
To Next Page
Loading...
Need help?
General
