Maintenance
1088
Light bulbs
with the slots in the assembly.
Push the socket into the assem
-
bly and turn the socket clockwise.
7. Install the service cover by putting
it into the service hole.
Rear fog lamp (LED type) bulb
replacement
If the rear fog lamp (LED) (1), does
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho
-
rised Kia dealer/service partner.The
LED lamps cannot be replaced as a
single unit because it is an inte
-
grated unit. The LED lamps has to
be replaced with the unit.A skilled
technician should check or repair the
rear fog lamp (LED), for it may
damage related parts of the vehicle.
High mounted stop lamp (Bulb
type) bulb replacement
If the high mounted stop lamp (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho
-
rised Kia dealer/service partner.
License plate lamp (Bulb type) bulb
replacement
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
To Next Page
Loading...
Need help?
General
