139
6
6
Driving your vehicle Rear Cross-Traffic Collision Warning (RCCW)
䳜 The setting of the Warning Timing
applies to all functions of Rear
Cross-Traffic Safety system.
䳜 Even though 'Normal' is selected
for warning timing, if the vehicles
from the left and right side
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 'Late' for warning timing
when traffic is light and when
driving speed is slow.
If the ignition switch or ENGINE
START/STOP button is changed to
the ON position, Warning Timing will
maintain the last setting.
Function operation
Function warning
Rear Cross-Traffic Safety system
will warn the driver when a collision
is imminent.
Collision warning
To warn the driver of an approach
-
ing vehicle from the rear left/right
side of your vehicle, the outside
rearview mirror will blink and a
warning will appear on the cluster.
At the same time, an audible warn
-
ing will sound and the steering
wheel will vibrate. If Rear View Mon
-
itor is operating, a warning will also
appear on the infotainment screen.
The function will operate when the
following conditions are satisfied:
䳜 Your vehicle gear is shifted to R
(Reverse)
䳜 Your vehicle speed is below 8 km/
h (5 mph)
䳜 The approaching vehicle is within
approximately 25 m (82 feet)
from the left and right side of
your vehicle
䳜 The speed of the vehicle
approaching from the left and
right is above 5 km/h (3 mph)
To Next Page
Loading...
Need help?
General
