Features of your vehicle
1024
Forward/Reverse Parking Distance Warning
(PDW)
does it replace the need for extreme
care and attention of the driver.
The sensing range and objects
detectable by the sensors (1) are
limited. Whenever moving pay as
much attention to what is in front
and behind of you as you would in a
vehicle without Forward/Reverse
Parking Distance Warning.
Forward/Reverse Parking Distance
Warning should only be considered
as a supplementary function. The
driver must check the front and rear
view. The operational function of
Forward/Reverse Parking Distance
Warning can be affected by many
factors and conditions of the sur
-
roundings, so the responsibility
rests always with the driver.
Operation of Forward/Reverse
Parking Distance Warning
Operating condition
䳜 This function activates when the
Parking Safety button is pressed
with the ignition switch or ENGINE
START/STOP button ON.
䳜 The indicator of the Parking
Safety button turns on automati
-
cally and activates Forward/
Reverse Parking Distance Warning
when you shift the gear to the R
(Reverse) position. It will turn off
automatically when you drive
above 20 km/h(12mph).
䳜 The sensing distance whilst back
-
ing up is approximately 120 cm
(48 inches) when you are driving
less than 10 km/h (6.2 mph).
䳜 The sensing distance whilst mov
-
ing forward is approximately 100
cm (40 inches) when you are driv
-
ing less than 10 km/h (6.2 mph).
䳜 When more than two objects are
sensed at the same time, the